Viper Custom Brake Lines

Viper Gen 2 1996-2002 Stainless Steel Braided Flex Brake line kit Rubber hoses expand, with the approximately 1200 PSI generated under hard braking. This can give a spongy brake pedal feel / decreased performance / and track time inconsistency. IPSCO uses STOPFLEX® hoses which incorporates a special 4 layer design for superior strength and virtually no volumetric expansion. Starting with a Teflon PTFE core (liner) which is wrapped first in a Kevlar braid, followed by an elastomer barrier and then it's strengthened further by the outer stainless steel braid. Hoses are then fitted with a final coat of clear vinyl for a great look and easy clean up. Installing these stainless steel braided hoses will increase braking performance by providing a firmer pedal feel, which in turn allows more control during braking. They are D.O.T. certified * and approved for street use. Sold as a complete set of 4 hoses (Front & Rear) with new crush washers and Stainless Steel Frame Fitting to fit in the OEM mounting locations. *What makes a hose D.O.T. certified? The Department of Transportation (D.O.T.) has developed a set of standards, FMVSS # 06 (Federal Motor Vehicle Safety Standard), to which all flexible hoses must perform without failing under extreme conditions. In order to be certified the hose must pass the "whip" test. STOPFLEX® hose's 4 layer design has proved superior under testing conditions and have surpassed D.O.T. condition.